Version History
Here you can find the changelog of SecureSmart since it was posted on our website on 2016-09-28.
The latest version is 3.24.2 and it was updated on soft112.com on 19 April, 2024.
See below the changes in each version:
version 3.24.2
posted on 2024-04-17
Apr 17, 2024
Version 3.24.2
- Chatty zones will now be indicated along with other zone issues.
- Badge support added for security system events.
- Critical notification support added.
- Fixed live view crash.
- Added support for silence trouble beeps on certain panels.
- Z-Wave thermostat controls updated for all known system modes.
- Added Spanish support.
- Trouble conditions for the Touchpad should now show the correct touchpad hardware ID.
- Resolved an issue where doorbell press notifications didn't contain a thumbnail.
- Added support for BAT-Mini.
- Added support for Heat sensors on certain panels.
- Cleared type ahead after selecting a zone token on certain panels.
- Added time sensitivity notification support.
- Improved chat notifications to better to more accurately inform the user of the sender.
- Resolved an issue that prevented the New User form from being scrollable at times.
- Fixed a bug that causes issues with FaceID permissions.
- Fixed a crash that could occur when using the Suggest button while changing your password.
- The camera reboot option will now show for a certain camera firmware that wasn't previously supported but should have been.
- Misc performance improvements and bug fixes.
version 3.21.2
posted on 2023-10-16
Oct 16, 2023
Version 3.21.2
- Resolved a bug that could result in the no-entry delay modifier being incorrectly shown.
- Resolved an issue that prevented the New User form from being scrollable at times.
- Fixed a bug that causes issues with FaceID permissions.
- Fixed a crash that could occur when using the Suggest button while changing your password.
- Improved chat notifications to better to more accurately inform the user of the sender.
- General performance and stability enhancements as well as bug fixes.
version 3.20.1
posted on 2023-06-01
Jun 1, 2023
Version 3.20.1
- Made modifications to camera enrollment flows to better support different models.
- Resolved an issue that prevented the password strength meter from working when adding a user.
- Updated some verbiage around certain camera motion detection area configurations.
- Added missing localizations.
- Resolved an issue where unenrolling a zone would temporarily remove all zones associated with that sensor regardless of zone input index.
- Resolved user device permissions UI issues.
- Resolved issues with the arm silent / arm audibly modifier.
- Resolved issues that caused various lists to be incorrectly sorted.
- Resolved camera related issues for certain models.
version 3.20.0
posted on 2023-04-20
Apr 20, 2023
Version 3.20.0
- Resolved some issues with the arm silent / arm audibly modifier.
- Resolved issues that caused various lists to be incorrectly sorted.
- Fixed an issue that prevented the app from ingesting some camera names at provisioning time.
version 3.19.0
posted on 2023-04-05
Apr 5, 2023
Version 3.19.0
- Fixed demo mode which was only showing cameras.
- "Demo" mode button is now disabled when there is text in the password field
- Network call improvements.
version 3.18.0
posted on 2023-03-24
Mar 24, 2023
Version 3.18.0
- Removed un-utilzied contact info fields.
- Peripheral display support added.
- Peripheral management support added (when allowed).
- Resolved an issue that could cause camera info to not be properly populated.
- Resolved an issue that resulted in notification tokens not being registered on the first launch correctly.
- Improved user management, especially "by system".
- The user will now be prompted to double check changes after attempting a WiFi network reconfiguration on a camera to verify desired settings.
- Post WiFi reconfiguration on a camera, the application will kick off an automatic configuration migration attempt to sync the camera with previously known settings.
version 3.12.0
posted on 2022-07-21
Jul 21, 2022 Version 3.12.0
- Improved display performance/consistency/reliability for Cancel/Confirm.
- Fixed a bug where switching between dates on the camera cells wouldn't transition the slider thumbnail icon.
- The video cell slider should now default to showing the most recent clips first when looking at "Today".
- Fixed a bug where account holders couldn't delete other account/admin level users.
- Updated some camera provisioning screens.
- Removed the floating chat icon from non-primary screens.
- Added support for new tilt sensor.
- Added motion detection region support.
version 3.9.0
posted on 2022-04-26
Apr 26, 2022 Version 3.9.0
- Improved the manual input flow for camera registration and added support for new cameras.
- Added an in-app notification settings link in the app's notification system settings.
- Improved new camera online/offline status handling.
- Improved Concord 4 support.
- User permissions are no longer allowed to be modifiable while a system is armed.
- The video event player should now allow you to go back to the last event at the end of the list instead of the previous to the last event.
- Resolved an issue where a user would be incorrectly informed that they don't have permission to perform an alarm arming action in certain scenarios when they actually do.
version 3.8.0
posted on 2022-03-31
Mar 31, 2022 Version 3.8.0
- Added an SD-Card check message at the beginning of camera provisioning.
- Fixed a branding issue when switching between different accounts where one account has branding disabled.
- Fixed an issue where an account that doesn't have devices but is configured for cameras, doesn't see the camera controls without a forced restart.
- The app should now prevent your phone from "falling asleep" during camera provisioning.
- Updated branding code to use provided color as the primary.
- Improved camera list refresh behavior when a new camera is provisioned.
- Fixed a bug on certain forms that could cause the app to crash.
- Improved camera notification thumbnail handling.
- The camera firmware screen should no longer show the Update Firmware button once a firmware update is in progress (on supported cameras).
- Added support for new cameras.
version 3.7.4
posted on 2022-02-15
Feb 15, 2022 Version 3.7.4
- Fixed a color issue that was making it impossible (or close to it) to read thermostat temperature.
version 3.7.3
posted on 2022-01-28
Jan 28, 2022 Version 3.7.3
- Fixed a bug that prevented BAT-Fire from seeing the event log.
- Fixed a bug that prevented certain legacy security panels from displaying in the app.
- Fixed a bug that resulted in an error message when provisioning a new camera model.
- Fixed a bug that caused a crash during device naming procedures.
version 3.7.2
posted on 2022-01-04
Jan 4, 2022 Version 3.7.2
- Fixed some crashing bugs.
- Added a firmware check following provisioning of cameras. Provided there is an available firmware update, the app will kick off the update and prompt the user.
- Added support for new camera models.
version 3.7.1
posted on 2021-12-02
Dec 2, 2021 Version 3.7.1
- Fixed some crashing bugs.
version 3.7.0
posted on 2021-10-28
Oct 28, 2021 Version 3.7.0
- Resolved an issue that prevented the UI from honoring inherited `Validate on Disarm` and `Validate on Resume` preferences for Account Manager accounts. The app will now correctly prevent toggling of those when the Account Holder has turned them on and set them to be inherited.
- Fixed a bug that could result in the incorrect password being used during password validation scenarios if the client has had multiple users log in since the last cold launch.
- Account-holders will now be prompted to validate their password when trying to toggle on validating on resume/disarm.
- Added dealer branding logo to the dealer info screen.
- Zone chime toggles should now be disabled if Global Chime is disabled or the user isn't an account manager.
- Improved dynamic dealer branding support.
- Added a theme color picker.
- Fixed a bug where the validate on disarm state wouldn't be honored during an alarm if toggled off.
- Added cancel/confirm support where the feature is enabled by a device.
- Fixed an issue that could prevent camera WiFi reconfiguration from working properly.
- Fixed a video landscape rotation issue as well as some other layout issues related to the device rotation.
- The EULA accept button is now enabled by default.
version 3.6.3
posted on 2021-09-16
Sep 16, 2021 Version 3.6.3
- Fixed a bug that incorrectly allowed sub-users access to the camera provisioning workflow, which would fail as a result of their user type.
version 3.6.1
posted on 2021-09-05
Sep 5, 2021 Version 3.6.1
- Added device grant option during admin user creation.
- Increased camera-event and camera clip page size, resolving an issue where events or clips would not be displayed.
- Fixed an issue where camera events were being filtered by a time using seconds instead of milliseconds causing the calendar picker to fail.
- Camera live view preview and live view are no longer blocked by the reported status of the camera, preventing the user from viewing the camera when the status is inaccurate.
version 3.6.0
posted on 2021-08-24
Aug 24, 2021 Version 3.6.0
- Resolved an issue with certain camera QR Codes that caused the app to crash.
- Created a new prompt for manually entering camera provisioning info when QR Codes fail.
- Resolved an issue where demo mode didn't work after being logged into an actual account.
- Improved feedback during Camera SD Card formatting.
- Resolved an issue where partially downloaded clips couldn't be resumed/replaced and therefore prevented the user from storing those clips in their camera roll.
- Added support for Fully Qualified Domain Names in video clip/image URLs.
- Resolved an issue where the app could hang when the user tried to download a clip that had already been downloaded.
- Added authorization headers to clip requests.
- Added a "Live View Only" dialog for users that don't have a clip limit assigned to their accounts.
- Added support for the LongLife DWS sensor.
- Changed zone bypass verbiage.
- Fixed issues with the Touch ID / Face ID toggle buttons in preferences.
- Removed arming bar UI components when a system is offline and replaced w/ "System Offline" text.
- Added a skeleton view to the Arming Bar while the app pulls down data to refresh it initially w/ current state.
- Resolved an issue where clicking on a camera cell while looking at the clips view could launch into live view.
- Fixed an issue where the security screen would return to zones in attention after navigating back from an individual zone's details/edit screen.
- Fixed an issue where the app would constantly try to force the user to the alarm screen when a panel is in alarm.
- Added username persistence to the login screen to show the previously logged-in user after a user logs out.
- Added a visibility toggle button to the password field on the login screen.
- Added z-wave thermostat humidity support.
- Improved zone enrolling error detection and added a custom keyboard.
- Added 24 Hour clip slider to the camera card.
- Selecting live view will now hide the camera button on the camera card.
- If no clips are present, an image will be displayed as a placeholder on the camera card.
- Added preliminary support for the new doorbell camera (including the Human Detection toggle).
- Modified some camera online/offline handling/checking logic.
- Added clip Picture in Picture support.
- Added clip navigation (previous/next) per day support.
version 3.5.25
posted on 2021-07-17
Jul 17, 2021 Version 3.5.25
- Resolved an issue where the app could crash when your system is in alarm.
version 3.5.23
posted on 2021-06-10
Jun 10, 2021 Version 3.5.23
- Resolved an issue where the Disarm button wouldn't work on Concord 4 panels via BAT-LTE.
- Resolved some crashing bugs.
version 3.5.22
posted on 2021-06-03
Jun 3, 2021 Version 3.5.22
- Stability updates.
- Resolved an issue with certain camera QR codes.
version 3.5.20
posted on 2021-05-11
May 11, 2021 Version 3.5.20
- Fixed a bug that causes Demo mode to crash the app.
version 3.5.18
posted on 2021-05-10
May 10, 2021 Version 3.5.18
- The scene name is populated in the edit text field when presented to edit the scene name.
- Fixed some bugs in the user creation/deletion process and cleaned up the feedback a bit.
- Panel event log times will be converted from UTC to panel time for display.
- The notification screen will inform the user if notifications for the app are disabled at the system level.
- Manage Systems menu option will no longer be visible if a user doesn't have any systems to manage.
- Fixed timezone bugs in the video clip picker and calendar views.
- Enforcing 20 character scene names to prevent failed name saves.
- Panel location configuration is now easier and shows the user the lat/long once set.
- Fixed an issue that prevented the app from resetting the exit delay timer when an "Exit Delay Restart" event occurs. (Note: This change partially works w/ existing C+ firmware but will need a fw update to V1.1.22.55 or later for C+ to fully work).
- Cleaned up Z-wave subtitles in the scenes action/trigger descriptions when only one endpoint exists.
- Fixed some Concord button mapping issues.
- Resolved an issue where z-wave devices would show as non-responsive incorrectly.
- Z-wave devices' "Delete Device" option will now show in a drop-down under their device page under more conditions related to non-functioning or malfunctioning devices than was previously the case.
- Bubbled up panel location problems when a panel supports scenes and has at least one.
- Settings for panels will now prompt the user when they try to perform an action that can't be done due to the device being offline.
- Settings now disallow taking actions that can't be completed when a device is offline.
version 3.5.17
posted on 2021-03-18
Mar 18, 2021 Version 3.5.17
- Resolved a bug that could cause a crash when clicking on certain cells in the System Settings menu.
- Resolved a bug that could occur if you had one or more systems on an account with one having an empty friendly name, where the app would get stuck on the empty friendly name device and wouldn't let you switch to another device.
- Resolved a bug that could cause a crash when selecting a scene with various z-wave actions/triggers that were configured to use the "Any Z-Wave Device" option.
- Resolved a bug that could cause a crash when attempting to update certain motion or timezone settings for a camera.
- Fixed an issue with creating Key Fob triggers using the Any Key Fob option that was causing a crash.
- Improved camera SDK stability to reduce the chance of a crash.
version 3.5.15
posted on 2021-03-10
Mar 10, 2021 Version 3.5.15
- Fixed a notification token registration issue.
version 3.5.13
posted on 2020-11-13
Nov 13, 2020 Version 3.5.13
- Modified password reset flow to make Username optional.
- Resolved an issue that prevented the Glass Break LP from being enrolled via the app.
- Resolved a bug that resulted in the Security screen zones scrolling off-screen in a way that made them inaccessible.
- Resolved an issue that resulted in the temperature of zones displaying incorrectly at times (usually reading as 0).
- Improved camera online/offline detection slightly.
- Resolved a virtual keypad issue on iPad where rotating the screen would cause the lower rows of buttons to go off-screen.
- Added camera Privacy Mode support.
- Resolved an issue that allowed un-enrolled zones to show on the Home dashboard.
version 2.6.2
posted on 2018-05-02
2 May 2018 Version 2.6.2
- Fixed issue which was preventing Touch ID section from being shown in the menu.
- Added support for a new Connect Plus device type.
version 2.6.2
posted on 2018-05-02
May 2, 2018 Version 2.6.2
- Fixed issue which was preventing Touch ID section from being shown in the menu.
- Added support for a new Connect Plus device type.
version 2.0.43
posted on 2014-03-27
version 3.5.13
posted on 1970-01-01
2020年11月13日 Version 3.5.13
- Modified password reset flow to make Username optional.
- Resolved an issue that prevented the Glass Break LP from being enrolled via the app.
- Resolved a bug that resulted in the Security screen zones scrolling off-screen in a way that made them inaccessible.
- Resolved an issue that resulted in the temperature of zones displaying incorrectly at times (usually reading as 0).
- Improved camera online/offline detection slightly.
- Resolved a virtual keypad issue on iPad where rotating the screen would cause the lower rows of buttons to go off-screen.
- Added camera Privacy Mode support.
- Resolved an issue that allowed un-enrolled zones to show on the Home dashboard.